Search instead for. Did you mean:. This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.
Back to Topic Listing Previous Next. Filter by Lables. Failure while chamfering. Message 1 of 7. By default the value of this system variable is set to -3 which keeps it off you change this system variable to 3 to make dynamic input active. Dynamic input allows you to add information dynamically on the cursor tooltip.
When ortho mode is on you can make lines either horizontally or vertically only. With polar tracking active you can make lines inclined to any angle which is defined in the polar tracking increment angle. Using this toggle you can activate the isometric drawing plane in AutoCAD. You can also toggle between different isoplanes using F5 function key.
Using this option you can track snap points of geometries like center, midpoint, endpoint etc and make geometries with their reference. One the most important status bar toggles.
This option allows you to make precise AutoCAD drawings. This system variable toggles the visibility of lineweight in a drawing. The default value of this system variable is OFF which keeps the lineweight display off you can change its value to ON to keep lineweight visible in the drawing area.
Just like lineweight this status variable allows you to toggle the visibility of transparency of an object. You change the value of this system variable to 1 to make transparency visible or 0 if you want to make it invisible. Using this system variable you can select overlapping objects very easily. When the value of this system variable is set to 2, an overlapping icon and a menu containing a list of overlapping objects appear and you can select the required object from this list.
If you set the value of this system variable to 1, only the overlap icon appears not the menu. You can turn this off by changing the value of this system variable to 0. Dynamic UCS can be activated or deactivated using this function key. Using this status bar option you can open Graphics configuration window which is used to change settings related to display and graphics properties of AutoCAD.
These are some of the commands which can be frequently used in your drawing workflow to improve your overall efficiency. You might be familiar with many of these commands but there are also some commands which are really helpful still they remain largely unused. This command is useful for counting the number of blocks in your drawing.
It reports the number of each instance of block used in the drawing along with its name. To count the block it should be visible in the drawing area. Using this command you can convert single line as well as multiline text into geometries.
Using this command you can make infinite lines starting from the point of selection. When you trim or break this infinite line to a finite length it becomes a simple line geometry. This command makes a single point geometry in the drawing. To modify the type of point created by this command you can use PTYPE command and choose the desired point type from Point Style window. Using this command you can make a revision cloud geometry by freehand sketching. You can make a freehand sketch using this command.
You can use Line, Polyline or Spline as the object type for making this freehand sketch. To cancel repetition of command press ESC key. Use this command to copy nested objects from a block or Xref without exploding them. Using this subcommand you can perform calculations directly on the AutoCAD command line even when you are in the middle of a command.
Explodes the block containing attributes retaining the attribute setting and its layer definition. This is especially helpful if you want to retain the text of attribute after exploding the block. Using this command you can check the spelling of selected text and correct the spellings from Check Spelling window.
This command can be used to write arc aligned text in AutoCAD. You can use this command to even write text aligned to a circle. More about this command can be found in this related article. This command can be used to restore the last deleted object in your drawing.
After deleting an object if you made many other changes in the drawing and realized that you might need to restore the deleted object then simply type OOPS and press enter. This command can be used to change the space of an object from model space to paper space and vice versa. See the animated image shown below for reference. You can use this command to divide any 2D geometry into many equal parts.
At each point of division, a point geometry will be added on the 2D curve. If you need to rename any named object like layer, block or linetype simply use this command to rename it. This command can be used to break 2D geometries at one or two points. It is helpful if you want to break a curve at the point of intersection with other curve or if you want to create a gap by breaking a part of the geometry.
Using this command you can find a lot of information about your drawing like the date when the drawing was created and total editing time consumed on the drawing. This command can be used to make the selection from your drawing with filters. As an example, you can use quick select to make a selection set containing all circles of the drawing with the radius of a particular value. It can be used to find the distance between two points in the drawing.
You can paste the copied objects from clipboard to your drawing using this command. Using this command you can find lots of properties of an object like the layer they are on, area, length or radius, perimeter or circumference and a lot more. To use this command simply type LIST on the command line then press enter and select the object from drawing area about which you want to know and press enter again. This command was introduced in AutoCAD version and it can be used to make most of the dimensions like Linear, aligned, radius, diameter and baseline.
If you want to add a feature control frame representing tolerance related information in your drawing then you can use this command. Using this command you can change the scale of existing Text or Mtext object in the drawing. When the scale of these text entities are changed the base point will remain fixed. Using this command you can change the base point of a drawing without changing its origin.
This is especially helpful in the situation where you want to insert the drawing into another as a Xref. By default, AutoCAD takes origin as the base point which can be modified using this command without changing the origin.
Using this command you can change the text justification of Text and Mtext elements in the drawing. Using this command you can set the drawing units and other settings like the precision of linear and angular dimensions and default rotation angle. Using this command you can make a multiline geometry which contains multiple parallel lines.
You can insert a block or a drawing as a block in the table using this command. I have made a simple table by importing blocks of design center as shown in the image below. As the name suggests this command can be used to find the area of closed or open shapes in the AutoCAD drawing.
To know more about finding the area in AutoCAD drawings refer to this related article. Using this command you can reorient text entities in a best readable position. In image A below the text is oriented at different angles and in some of the situations, the text is not properly readable. This command can be used to find the coordinate values of a point in AutoCAD drawing.
Using this command you can insert existing blocks of a drawing as a rectangular array component. Using this command you can extract closed boundaries from any enclosed area. This boundary can be used to find the area of the enclosed region or for many other applications. This command can be used to make a dimension line inclined to a particular angle with respect to the positive side of the X-axis.
You can use this tool to make a Breakline symbol on a line. Select the starting and end points of the breakline then click at any point on the line to specify the location of breakline or directly press enter to place it exactly at the center of the line. Using this command you can convert a text object into a Mtext object and you can also combine multiple separate Mtext objects into a single Mtext unit.
As the name suggests this command can be used to save all of the open drawings in AutoCAD window. There are many best practices that you follow to keep your AutoCAD software and PC in great working condition and there are also many inbuilt tools and commands in AutoCAD that help you in keeping the performance of your software properly optimized. See the security advisory on the Autodesk Trust Center for more information.
AutoCAD Forum. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:.
0コメント